Switching from STA Mode to AP mode

[klimbot]

Enable Web UI to setup Wifi

I use the following to turn AP on and off. Took me a while to work out that the device config ap state does not change when you turn AP on/off, so I’m doing it explicitly. Probably means that this is not the right way to do it static void enable_ap(void) { struct mgos_config_wifi_ap ap_cfg; memcpy(&ap_cfg, mgos_sys_config_get_wifi_ap(), sizeof(ap_cfg)); ap_cfg.enable = true; int result = mgos_wifi_setup_ap(&ap_cfg); // Seems to be the easiest way to track AP enabled/d…